Job sharing 17th March 2018

 
We have the following open roles with the client to if any friends or colleagues interested please let me know
 
Share resume at This email address is being protected from spambots. You need JavaScript enabled to view it.
 
Below are the initial positions our client is looking to hire. Tentative workshop plan will be on
 28 April to 1 May in Mumbai 
1. Electrical Engineer
2. Mechanical Engineer
3. Instrumentation Engineer
4. Civil Engineer
5. Materials Advisor
6. Offshore Rig Coordinator- will be the focal point of all Rig department; should have experience in Single point system, Loading systems, 10 years’ experience in offshore Rig site.
All mentioned positions required minimum 10 years relevant work experience in Onshore and Offshore fields. Location will be across Saudi Arabia
Note: We are not Hiring Design candidates.
 
*****************
 

Kindly go through the positions mentioned below and share your CV at the earliest. Do share this mail with your friends if you are not interested.


 

Position


Supervisor- Commissioning (Field Operators)

Diploma Mechanical/E&I Exp 7Yrs; Location UAE; Duration 6 Months; Open Positions 10;Salary Range 1600 USD + FAT;


Supervisor- Commissioning (Mechanical)

Diploma Mechanical Exp 5Yrs; Location UAE; Duration 6 Months; Open Positions 10;Salary Range 1600 USD + FAT;


Engineer- Commissioning (Mechanical)


B.E/B.Tech Exp 5Yrs; Location UAE; Duration 6 Months; Open Positions 10;Salary Range 1800 USD + FAT;


1.       Field Operations – Commissioning Supervisor (10’nos)


     Inspects installations to assure compliance with design drawings and work instructions.


      Ensures correct installation and lineup of all equipment and process packages.


      Performs dynamic testing and assists mechanical disciplines during checks.


      Finds and remedies faults on equipment.


      Records test results and compiles as-built drawings of changes.


      Works in hazardous areas under permit to work regulations.


      Supervises the Field Operators with respect to work scope. Contributes technical skills and experience to ongoing development of work procedures, practices and lessons learned.


      Undertakes all required training activities.


      Acts as area authority in the PTW system


      Leads and Participates the tool box talk.


2.       Commissioning Supervisor – Mechanical (5’nos)


Primary Duties :


Ensures that all commissioning activities are completed in a safe, efficient and cost effective manner.


Provides day to day support to Commissioning Engineer/Commissioning Coordinator.


Setting up technical teams and monitoring progress to schedule.


Confirms/arranges suitable PPE is available to all personnel under him.


Arranges PTW, Tool Box talks are completed in line with HSE requirements prior work start.


Be continually present on the field to guarantee the quality and progress of the work.


Ability to lead a team of technicians/operators/ sub-contractor and safely execute the work.


Analyse team performance against schedule and report/advise any changes required to maintain


progress to line management.


Monitor availability of personnel to complete planned workloads.


Liaise with other disciplines to ensure work fronts are available as required.


Ensure transport is available for site teams.


Look at initiatives to improve the work within pre-commissioning and commissioning.


Prepare all testing dossiers along with proper document to safely execute the work (Drawings,


procedures, etc…)


Keep technically updated through the study of related technical literature including procedures and


guidelines.


Ensure correct tool packages are available along with detailed comprehensive commissioning


procedures for individual jobs.


Review spares, spare usage against plan.


Investigate causes of defective operation of systems and equipment including interfaces to other


systems and suggest modifications to equipment or operational conditions.


Ensure that commissioning procedures are adhered to and complete all necessary documentation to


facilitate work and up-date records.


Ensure full compliance to company Fire & safety & Environment procedures/standards in all


executed work-tasks and actively contributes to sections HSE.


Identify potential HSSE risks (related to commissioning) and take appropriate steps to mitigate it.


Ensure commissioning area is controlled, all energized systems clearly marked and barricaded off.


Access control in place, SIMOPS carefully assessed and controlled.


Give inputs to concern so as to ensure minimum standby time for vendor representative and avoid


their revisits.


Accurate interpretation and understanding of P&IDs, process flow diagrams, circuit diagrams and


control narratives; no rework or time lost due to incorrect interpretation.


Review spares part usage against plan


Perform any other related duties and responsibilities as and when directed by Supervisor


Responsibilities:


Ability to execute mechanical commissioning activities and guide Technicians during work execution


· Ability to monitor and maintain rotating equipment in healthy condition (vibration, lubrication


level, mechanical seal, gland packing, bearings, etc.).


· Ability to prepare rotating equipment for first start-up and ensure readiness for operation (removal


of shipping locks, lubricating oil, alignment, packing installation, greasing, strainers installation,


etc.).


· Ability to guide in preservation and maintenance of rotating equipment after equipment


commissioning and start-up.


· Ability to assist in performing various activities related to rotating equipment likes lube oil flushing,


alignment, lubrication, vibration checks, start-up etc.


· Ability to assist in performing various activities related to static equipment likes proper installation


of internals inside the vessels as per drawing & specifications.


· Ability to assist in performing various activities such as mechanical interlock, pipeline pigging


activities, spring support hot & cold setting, overhead crane functional and load testing, etc.


· Ability to assist in performing air blowing, flushing, leak testing, flange management, drying &


inerting of various piping.


· Ability of application of appropriate codes and standards for valve testing/repairs such as: API,


ASME, NBBI, ISO, BS, ANSI etc.


 


3.       Commissioning Engineer – Mechanical (5 nos)


Primary Duties :


Identify requirements and scope of work, review specifications, drawings and other documents of the


project and establish applicability to the scope of work.


Keep technically updated through the study of related technical literature including procedures and


guidelines.


Provide necessary inputs to commissioning proposals at the bidding stage.


Be continually present on the field to guarantee the quality and progress of the work.


Ability to perform Job Safety Analysis (JSA) and toll box talk to executing the activities.


Ability to complete reports and check sheets, receive client’s supervisor approval/signature and submit


to the turnover team for uploading in CMS.


Ability to organize and execute Pre-commissioning/Commissioning activities and provide detailed


report to senior engineer.


Attend daily meeting with Commissioning coordinator and team leaders to update the progress and


receive daily reports.


Regularly contact with discipline engineers and supervisors for solving problems related to project


execution work safely.


Ability to lead team of supervisors and technicians to execute the work.


Perform any other related duties and responsibilities as and when directed by the Supervisor.


Responsibilities:


 


Ability to produce project specific procedures, Preservation & Maintenance check sheets, matrix and


schedules.


Ability to find out technical problems associated with rotating/static equipment and mechanical


packages/valves are identified and resolved or coordinated with the respective vendor.


Ability to preserve and maintain rotating equipment after equipment commissioning and start-up.


Ability to perform various activities related to rotating equipment likes lube oil flushing, alignment,


lubrication, vibration checks, start-up etc.


Ability to perform various activities related to static equipment likes proper installation of internal


 


Kindly peruse the above terms & If you are meeting the mentioned criteria. Kindly help us with your Updated CV and details like current-expected CTC, notice period, Skype id in the covering mail ASAP. Based on your confirmation we will propose your CV to client


Thanks & Regards,


Ratna Kataria.


9320993024

**********************

 

*************************